Superior Strength
Through patented technology, a non-woven polyester fleece is laminated to the underside of the standard RubberBond™ EPDM making FleeceBack™ a more substantial and stronger EPDM product. This makes it an extremely durable rubber roofing material that is:
- Over twice the thickness of standard EPDM
- 180% plus greater tear resistance*
- 60% plus greater impact resistance*
- There is no shrinkage or stress to cause leaks at flashings, upstands or other penetrations.
*Greater than standard 1.14mm-thick EPDM
Over 40 Years Proven Life Expectancy
The first synthetic rubber EPDM roofs were laid in the States by Carlisle™ Syntec in the 1960’S and are still protecting these roofs today.
Well known buildings rely on their EPDM rubber roofing such as Honda factories, Microsoft, Staples, Barclaycard, The Play House Theatre, schools, shopping centres, railway stations, hospitals and hundreds of thousands more commercial and residential properties.
Weather Resistant Rubber Roofing
RubberBond™ FleeceBack™ is not affected by extremes of temperature. Installations are in varied climates - from the glaring sun of the Middle East to the freezing cold of Siberia and Alaska.
RubberBond™ rubber roofing is not degraded by ultra violet or ozone as again witnessed by the many installations in hotter climates such as the Middle East.
|
Good Looking
- The colour of a dark grey slate looks natural and doesn’t easily show dirt.
- The smooth synthetic rubber finish does not require ballast or chippings that have an annoying habit of blocking gutters and downpipes.
- RubberBond™ does not support moss growth. It not only looks good on day one but also stays looking good even after 30+ years...
- The additional thickness of FleeceBack™ helps to hide the negative of the existing deck or finish.
Flexible Rubber Roofing
RubberBond™ easily bends with no stress, to follow the contours of the roof, up stands to walls, check curb edges, sky lights, pipes, terminations into gutters and the like.
RubberBond has over 300% flexibility so will easily accommodate building movement.
Resilient
RubberBond™ FleeceBack™ rubber roofing repels all moisture and does not suffer with age from cracking or crazing.
RubberBond™ FleeceBack™ “breathes” allowing vapours to escape, thus preventing blisters.
Ecologically Friendly
Extremely ECO friendly materials all applied with little energy – Both Government and the International Kyoto Ecology agreement recommend EPDM rubber as Best Value sustainable eco-sound roofing.
Tried and Tested
 The RubberBond™ rubber roofing system holds British Board of Agrément certification No 02/3967 BBA – is designated by government to issue European technical approvals.
|
|
RubberBond FleeceBack EPDM is made by Carlisle-Syntec Inc.
-
Carlisle™ provides what no other single-ply manufacturer can - over 45 years of experience, credibility and reliability
- The world’s largest single ply flat roofing manufacturer
- The first Carlisle™ synthetic rubber membranes laid in 1960 are still protecting roofs to this day
- Over 40 years proven longevity
- Over 1 billion square metres of material installed
- Annual turnover is in excess of $2 billion
- World wide coverage
|
What is RubberBond™ EPDM?
RubberBond™ EPDM (Ethylene Propylene Diene Monomer) synthetic sheet rubber membrane is a remarkable material that:
- Repels all moisture, snow and rain
- Is flexible and easily bends with no stress, to follow the contours of the roof, upstands to walls, check curb edges, skylights, pipes, terminations into gutters and the like.
- Can stretch with up to 300% elongation, which easily accommodates building movement.
- Is not affected by extremes of temperature.
- Will not tear, split or crack with age.
- Is unaffected by ozone and UV radiation.
- Is manufactured in large sheet sizes from 3.05 to metres wide and up to 30.5 metres long.
This patented technology laminates a layer of non-woven polyester to the underside of the RubberBond™ EPDM resulting in:
- A thicker stronger product
- Rubberbond EPDM being over twice the thickness of standard EPDM
- 180%* plus greater tear resistance
- 60%* plus greater impact resistance
- There is no shrinkage or stress to cause leaks at laps, flashings, up stands or other angle changes or penetrations
*Greater than standard 1.14-thick EPDM
before and after
 
|
|
